Supply Of PET Release Liner
Specifications:
|
Thickness(micron) |
Width(mm) |
Core ID(inch) |
|
25~50 |
500~2000 |
3”or 6” |
|
The specifications can be adjusted according to the customers’ requirements. |
||
Typical Values：
|
Property |
Unit |
Typical value |
Testing Method |
|
Thickness |
mm |
50 |
DIN 53370 |
|
Tensile Strength（MD/TD） |
MPa |
175/247 |
ASTM D 882 |
|
Elongation at break（MD/TD） |
% |
166/106 |
ASTM D 882 |
|
Heat shrinkage（MD/TD）150℃,30min |
% |
1.0/-0.1 |
ASTM D 1204 |
|
Whiteness |
% |
118 |
ISO 2470 |
|
Gloss（45°） |
% |
68 |
ASTM D 2457 |
The above values of the properties obtained in our laboratory test. These values are for informative purpose and not in guarantee or warranty in any specific condition. Users are advised to conduct their own testing to determine product suitability to use.
Firsta White PET Film Main characteristics:
1.Low light transmittance
2.High-gloss surface
3.The top-coating side of this product has superior printing ink adhesion for UV ink printing and bar code printing on labels, which will not fade away over time like the corona-treated side does.
White PET Film Application:
It is used as face stock of white self-adhesive label, such as electronic products.
https://www.firstagroup.com/products/coated-white-pet-film.html
No information
Product：
Shipping To
Quantity
Contact Person
Valid for
Company/Institute
Notes
Successful
Successful submission of information.
