China BOPP Film Manufacturers
Specifications:
|
Thickness(micron) |
Width(mm) |
Core ID(inch) |
|
23-50 |
500~2050 |
3”or 6” |
|
The specifications can be adjusted according to the customers’ requirements. |
||
Typical Values:
|
Property |
Unit |
Typical value |
Testing Method |
|
Thickness |
mm |
45 |
DIN 53370 |
|
Tensile Strength（MD/TD） |
MPa |
140/277 |
ASTM D 882 |
|
Elongation at break（MD/TD） |
% |
202/40 |
ASTM D 882 |
|
Heat shrinkage（MD/TD）150℃,30min |
% |
3.0/0.2 |
ASTM D 1204 |
|
Haze |
% |
1.65 |
ASTM D 1003 |
|
Gloss（45°） |
% |
90 |
ASTM D 2457 |
The above values of the properties obtained in our laboratory test. These values are for informative purpose and not in guarantee or warranty in any specific condition. Users are advised to conduct their own testing to determine product suitability to use.
Firsta Metalized BOPP Film Main characteristics:
In addition to sharing the extraordinary chemical and physical properties owned by the ordinary polypropylene film, this product also has its unique performances:
1. Convenient for labeling, sharing the flexibility with PP film , and no edge lifting when squeezed, this product also has a better stiffness and label-taking-off performance than PE film, which can improve the labelling efficiency.
2. The top-coating side of this product has superior printing ink adhesion for UV ink printing and bar code printing on labels, when the other side has improved gelatinizing adhesion, which can make sure there is no glue transfer.
Metalized BOPP Film Application:
It is used as face stock of self-adhesive label, such as home care products and personal care products.
https://www.firstagroup.com/products/metallized-and-coated-BOPP-film.html
No information
Product：
Shipping To
Quantity
Contact Person
Valid for
Company/Institute
Notes
Successful
Successful submission of information.
